PC1-H1-R1-S1-R2-R3-PC3


Dynamic Routing
1. Enter RIP as the dynamic routing protocol on R2, R3 and R4
2. Verify static and dynamic routes
3. Enter a static route on R2 to reach R1's LAN
4. View the RIP routing updates in simulation mode

1. Enter RIP as the dynamic routing protocol on R2, R3 and R4
2. Verify static and dynamic routes
Step 1: Verify routing tables on each router
Step 2: Examine the routing table on R1
Step 3: Ping from R3 to PC1
3. Enter a static route on R2 to reach R1's LAN
Step 1: Configuring a static route on R2
Step 2: Examine the routing table on R2
Step 3: Ping from R3 to PC1
Step 4: Check result in the activity window
4. View the RIP routing updates in simulation mode
 Step 1: Changing from realtime to simulation mode
Step 2: Filter the traffic so that only RIP packets will be viewed
Step 3: Start the simulation