The IDEA is before you able to develop bigger network you may try to use small device.
Here at home, I have 2 wireless router that have capabilites such dynamic routing, nat, firewall, and bandwidth.
1 router is connected to the internet, other not directly connected to the internet;
Warning: TP-Link only support 1 network address per cable and wireless.
So we only have chance to build 2 network address on our network.
Task you need to do to accomplish are:
0. Setup wireless setting
1. Bridging 2 wireless SSID
2. Configure and use dynamic routing of both routing so host can communicate
3.
To configure dynamic routing, you need data:
1.
2.
2. Bridging 2 wireless SSID
To configure bridging, you need data:
3. Access restriction
To restrict an access you need:
1.
2.
3.
4. To limit the bandwidth
- Out of router 2 router 1, you need data:
5. To NAT certain address you need a data:
1. What address
6. To setting Firewall you need data:
- Are you use SPI
Here at home, I have 2 wireless router that have capabilites such dynamic routing, nat, firewall, and bandwidth.
1 router is connected to the internet, other not directly connected to the internet;
Warning: TP-Link only support 1 network address per cable and wireless.
So we only have chance to build 2 network address on our network.
Task you need to do to accomplish are:
0. Setup wireless setting
1. Bridging 2 wireless SSID
2. Configure and use dynamic routing of both routing so host can communicate
3.
To configure dynamic routing, you need data:
1.
2.
2. Bridging 2 wireless SSID
To configure bridging, you need data:
3. Access restriction
To restrict an access you need:
1.
2.
3.
4. To limit the bandwidth
- Out of router 2 router 1, you need data:
5. To NAT certain address you need a data:
1. What address
6. To setting Firewall you need data:
- Are you use SPI
No comments:
Post a Comment