Kak apakah yang disebut array itu?

Array adalah tempat untuk menyimpan nilai-nilai. Ini bahasa inggrisnya:
This object provides a way of storing more than one value for a given name. These values can be accessed by another index.

Router>enable

Router#conf t

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#

Router(config)#ip nat ?

inside Inside address translation

outside Outside address translation

pool Define pool of addresses

Router(config)#ip nat inside ?

source Source address translation

Router(config)#ip nat inside source ?

list Specify access list describing local addresses

static Specify static local->global mapping

Router(config)#ip nat inside source list ?

<1-199> Access list number for local addresses

WORD Access list name for local addresses

Router(config)#ip nat inside source list 100 ?

interface Specify interface for global address

pool Name pool of global addresses

Router(config)#ip nat inside source list 100 interface ?

Ethernet IEEE 802.3

FastEthernet FastEthernet IEEE 802.3

GigabitEthernet GigabitEthernet IEEE 802.3z

Serial Serial

Router(config)#ip nat inside source list 100 interface fa

Router(config)#ip nat inside source list 100 interface fastEthernet ?

<0-9> FastEthernet interface number

Router(config)#ip nat inside source list 100 interface fastEthernet 0/0 ?

overload Overload an address translation

<cr>

Router(config)#ip nat inside source list 100 interface fastEthernet 0/0 overload

Router(config)#ip nat inside source list 100 interface fastEthernet 0/0

Router(config)#ip nat inside source list 100 interface ?

Ethernet IEEE 802.3

FastEthernet FastEthernet IEEE 802.3

GigabitEthernet GigabitEthernet IEEE 802.3z

Serial Serial

Router(config)#ip nat inside source list 100 ?

interface Specify interface for global address

pool Name pool of global addresses

Router(config)#ip nat inside source list 100 pool ?

WORD Name pool of global addresses

Router(config)#ip nat inside source list 100 pool mypool ?

overload Overload an address translation

<cr>

Router(config)#ip nat inside source list 100 pool mypool overload

Router(config)#ip nat inside source list 100 pool mypool

Router(config)#ip nat inside source ?

list Specify access list describing local addresses

static Specify static local->global mapping

Router(config)#ip nat inside source static

Router(config)#ip nat inside source static ?

A.B.C.D Inside local IP address

tcp Transmission Control Protocol

udp User Datagram Protocol

Router(config)#ip nat inside source static 192.168.1.1 ?

A.B.C.D Inside global IP address

Router(config)#ip nat inside source static 192.168.1.1 10.10.10.1 ?

<cr>

Router(config)#ip nat inside source static 192.168.1.1 10.10.10.1

Router(config)#ip nat inside source static ?

A.B.C.D Inside local IP address

tcp Transmission Control Protocol

udp User Datagram Protocol

Router(config)#ip nat inside source static tcp

Router(config)#ip nat inside source static tcp ?

A.B.C.D Inside local IP address

Router(config)#ip nat inside source static tcp 192.168.1.1 ?

<1-65535> Local UDP/TCP port

Router(config)#ip nat inside source static tcp 192.168.1.1 80 ?

A.B.C.D Inside global IP address

Router(config)#ip nat inside source static tcp 192.168.1.1 80 10.10.10.1 ?

<1-65535> Global UDP/TCP port

Router(config)#ip nat inside source static tcp 192.168.1.1 80 10.10.10.1 69 ?

<cr>

Router(config)#ip nat inside source static tcp 192.168.1.1 80 10.10.10.1 69

Router(config)#ip nat inside source static ?

A.B.C.D Inside local IP address

tcp Transmission Control Protocol

udp User Datagram Protocol

Router(config)#ip nat inside source static tcp ?

A.B.C.D Inside local IP address

Router(config)#ip nat inside source static tcp 192.168.1.2 ?

<1-65535> Local UDP/TCP port

Router(config)#ip nat inside source static tcp 192.168.1.2 80 ?

A.B.C.D Inside global IP address

Router(config)#ip nat inside source static tcp 192.168.1.2 80 10.10.10.1 ?

<1-65535> Global UDP/TCP port

Router(config)#ip nat inside source static tcp 192.168.1.2 80 10.10.10.1 8080 ?

<cr>

Router(config)#ip nat inside source static tcp 192.168.1.2 80 10.10.10.1 8080

Router(config)#ip nat inside source static udp ?

A.B.C.D Inside local IP address

Router(config)#ip nat inside source static udp 192.168.1.2 ?

<1-65535> Local UDP/TCP port

Router(config)#ip nat inside source static udp 192.168.1.2 80 ?

A.B.C.D Inside global IP address

Router(config)#ip nat inside source static udp 192.168.1.2 80 10.10.10.1 ?

<1-65535> Global UDP/TCP port

Router(config)#ip nat inside source static udp 192.168.1.2 80 10.10.10.1 8080 ?

<cr>

Router(config)#ip nat inside source static udp 192.168.1.2 80 10.10.10.1 8080

Router(config)#

Router(config)#

Router(config)#

Router(config)#ip nat inside source ?

list Specify access list describing local addresses

static Specify static local->global mapping

Router(config)#ip nat inside ?

source Source address translation

Router(config)#ip nat ?

inside Inside address translation

outside Outside address translation

pool Define pool of addresses

Router(config)#ip nat outside ?

source Source address translation

Router(config)#ip nat outside source ?

list Specify access list describing local addresses

static Specify static global->local mapping

Router(config)#ip nat outside source list ?

<1-199> Access list number for local addresses

WORD Access list name for local addresses

Router(config)#ip nat outside source list 200 ?

pool Name pool of global addresses

Router(config)#ip nat outside source list 200 pool ?

WORD Name pool of global addresses

Router(config)#ip nat outside source list 200 pool mypool ?

<cr>

Router(config)#ip nat outside source list 200 pool mypool

Router(config)#ip nat outside source ?

list Specify access list describing local addresses

static Specify static global->local mapping

Router(config)#ip nat outside source stat

Router(config)#ip nat outside source static ?

A.B.C.D Outside global IP address

tcp Transmission Control Protocol

udp User Datagram Protocol

Router(config)#ip nat outside source static 192.168.1.1 ?

A.B.C.D Outside local IP address

Router(config)#ip nat outside source static 192.168.1.1 10.10.10.1 ?

<cr>

Router(config)#ip nat outside source static 192.168.1.1 10.10.10.1 ?

<cr>

Router(config)#ip nat outside source static 192.168.1.1 10.10.10.1

Router(config)#ip nat outside source static ?

A.B.C.D Outside global IP address

tcp Transmission Control Protocol

udp User Datagram Protocol

Router(config)#ip nat outside source static tcp ?

A.B.C.D Outside global IP address

Router(config)#ip nat outside source static tcp 192.168.1.1 ?

<1-65535> Global UDP/TCP port

Router(config)#ip nat outside source static tcp 192.168.1.1 ?

<1-65535> Global UDP/TCP port

Router(config)#ip nat outside source static tcp 192.168.1.1 80 ?

A.B.C.D Outside local IP address

Router(config)#ip nat outside source static tcp 192.168.1.1 80 10.10.10.1 ?

<1-65535> Local UDP/TCP port

Router(config)#ip nat outside source static tcp 192.168.1.1 80 10.10.10.1 8080

Router(config)#ip nat outside ?

source Source address translation

Router(config)#ip nat outside source ?

list Specify access list describing local addresses

static Specify static global->local mapping

Router(config)#ip nat outside source static ?

A.B.C.D Outside global IP address

tcp Transmission Control Protocol

udp User Datagram Protocol

Router(config)#ip nat outside source static udp ?

A.B.C.D Outside global IP address

Router(config)#ip nat outside source static udp 192.168.1.1 ?

<1-65535> Global UDP/TCP port

Router(config)#ip nat outside source static udp 192.168.1.1 192.168.1.1 ?

% Unrecognized command

Router(config)#ip nat outside ?

source Source address translation

Router(config)#ip nat outside source ?

list Specify access list describing local addresses

static Specify static global->local mapping

Router(config)#ip nat outside source

Everlasting good story

Memarahi diri sendiri

Nantilah kau kerjakan itu..
Tidak pakai tanda seru
Tidak memaki

Program that detect mouse left button down or up | Small Basic

The code below simply output a text "Mouse UP" when mouse left button is clicked is up and a text "Mouse Down" when mouse left click is down or clicked.

GraphicsWindow.MouseDown = mousedown
loopz:

If Mouse.IsLeftButtonDown = "False" then
TextWindow.WriteLine("Mouse UP")
endif
Program.Delay(100)
Goto loopz

Sub mousedown
  If Mouse.IsLeftButtonDown = "True" Then
    TextWindow.WriteLine("Mouse DOWN")
  EndIf
EndSub

While x <> 9
  x = Math.GetRandomNumber(10)
  j = j + 1
EndWhile
TextWindow.WriteLine(j)

What is bandwidth monitoring?

Bandwidth monitoring create simple reports on bandwidth usage by:
port for traffic sent from your system.
port for traffic routed through your system.

Bandwidth monitoring useful for both stand-alone hosts and gateway.

Before bandwidth monitoring can be used, module must setup firewall rules and a syslog entry.
And after that, you must select the system's external network interface, on which